Electronic Ignitions & Centrifugal Advance Distributors
for Model A & B Fords and other fine antique automobiles and antique farm equipment
FSI Electronic Ignition Conversion Kit
The FSI Electronic Ignition Conversion Kit, featuring the PerTronix Electronic Ignitor, (replaces the upper plate parts in your stock distributor) bolts to your distributor (the lower plate is no longer needed) and the included plastic ring presses onto your cam. That's about it! The red and black wire connect to the coil and the yellow wire is for grounding (wires included). The wires are fed through a new spring conduit, included, that
is very similar to the old pop-out cable, to maintain the stock appearance. Each kit comes with a coil matched to the proper OHMs.
The unit simply connects to the coil in the same wiring position as your original (pop-out switch cannot be used). There is no rat’s nest of multiple wires or an unsightly “black box” to hang on the firewall. No points, no condenser!
You get world class power and absolute precision!
Over 1100 conversion kits available!
Available in 6-Volt, 8-Volt, and 12-Volt.
FSI Electronic Ignition Conversion Kit 12-Volt Negative Ground With High Energy Heavy Duty Coil $156.00
FSI Electronic Ignition Conversion Kit 12-Volt Negative Ground
WITHOUT Coil $124.00
FSI Electronic Ignition Conversion Kit 6-Volt Positive Ground
With High Energy Heavy Duty Coil $164.00
FSI Electronic Ignition Conversion Kit 6-Volt Positive Ground
WITHOUT Coil $132.00
FSI Electronic Ignition Conversion Kit 6-Volt Negative Ground
With High Energy Heavy Duty Coil $144.00
FSI Electronic Ignition Conversion Kit 6-Volt Installation Instructions
FSI Electronic Ignition Conversion Kit 12-Volt Installation Instructions
Troubleshooting Guide
30-Month Limited Warranty
The FSI Electronic Ignition Conversion Kit, featuring the PerTronix Electronic Ignitor, (replaces the upper plate parts in your stock distributor) bolts to your distributor (the lower plate is no longer needed) and the included plastic ring presses onto your cam. That's about it! The red and black wire connect to the coil and the yellow wire is for grounding (wires included). The wires are fed through a new spring conduit, included, that
is very similar to the old pop-out cable, to maintain the stock appearance. Each kit comes with a coil matched to the proper OHMs.The unit simply connects to the coil in the same wiring position as your original (pop-out switch cannot be used). There is no rat’s nest of multiple wires or an unsightly “black box” to hang on the firewall. No points, no condenser!
You get world class power and absolute precision!
Over 1100 conversion kits available!
Available in 6-Volt, 8-Volt, and 12-Volt.
FSI Electronic Ignition Conversion Kit 12-Volt Negative Ground With High Energy Heavy Duty Coil $156.00
FSI Electronic Ignition Conversion Kit 12-Volt Negative Ground
WITHOUT Coil $124.00
FSI Electronic Ignition Conversion Kit 6-Volt Positive Ground
With High Energy Heavy Duty Coil $164.00
FSI Electronic Ignition Conversion Kit 6-Volt Positive Ground
WITHOUT Coil $132.00
FSI Electronic Ignition Conversion Kit 6-Volt Negative Ground
With High Energy Heavy Duty Coil $144.00
FSI Electronic Ignition Conversion Kit 6-Volt Installation Instructions
FSI Electronic Ignition Conversion Kit 12-Volt Installation Instructions
Troubleshooting Guide
30-Month Limited Warranty
- FS Ignitions offers a trouble-free solid state ignition system
- Completely new - not rebuilt
- Weather-tight
- 29 degree automatic centrifugal advance
- Ignition system provides better performance, better start, better idle, and more power!
- Spark plugs last 3 times longer!
220 N. 1st Street
Ponca City
PH 580-762-8322
FAX 580-762-8322
EMAIL fsignitions@cableone.net
